Competitor G Rigger (USA)

Go down

Competitor G Rigger (USA)

Post by Nitrorunner on Fri Aug 29, 2014 2:25 pm

Hello all, just joined and was invited by Nikos Kritsionis.  Posted here because there is no outrigger section under "Gas Boats".  My boat is from (gaspartsplus.com) and is setup for running 1/6th mile oval heat racing.  It's performed well so far, only got it wet 4 times and am still working on setup, but it's getting there.  It is 44 inches long and has a 24 inch beam, I don't know the weight of the boat with a full 250ml IV bag as I haven't weighed it.  I do know it's lighter than my sport hydro that weighs 18lbs. RTR.

Powered by a Gizmomotors Zenoah full mod 30cc with a mod 771 carb, Tiger King 1.6mm stroke crank and Daniel Place hot pipe.  Futaba 3PM-X radio w/Futaba R603fs dual antenna receiver, Reedy 1600mah 6.6v life pack and HI-TEC Hi Volt digital torque servos.








Last edited by Nitrorunner on Sun Aug 31, 2014 5:37 pm; edited 4 times in total
avatar
Nitrorunner

Αριθμός μηνυμάτων : 9
Ημερομηνία εγγραφής : 2014-08-29
Ηλικία : 33

Back to top Go down

Re: Competitor G Rigger (USA)

Post by milemaster on Fri Aug 29, 2014 8:38 pm

welcome nitrorunner!!!! as i told you before you have great nitro riggers !!!! great job !!! tell me what props you use at 18000rpm?
avatar
milemaster
Admin

Αριθμός μηνυμάτων : 348
Ημερομηνία εγγραφής : 2013-02-27

http://rcgreeksawboats.forumgreek.com

Back to top Go down

Re: Competitor G Rigger (USA)

Post by Nitrorunner on Fri Aug 29, 2014 10:06 pm

The prop in the pics is a Bob English (g force Hydros) ABC 2818, that prop lasted me 2 runs before 1 blade almost broke off from torque. 

I now have a modded 3018 2 blade I've been waiting to test and a Prop Works West (http://www.thepropworksusa.com/propellers-prices--order-info.html) 6820 3 blade on the way. Also on the wait list with CoCr props (http://cocrracing.com.au/links/) for a CC3+ 2 blade.  Most of the props that gassers run are made of either beryllium copper, different strains of stainless steel and the cream of the crop, Cobalt Chrome.  Some of these props I've since sold and replaced with different ones.  Lol Cool


Imilemaster wrote:welcome nitrorunner!!!! as i told you before you have great nitro riggers !!!! great job !!! tell me what props you use at 18000rpm?
avatar
Nitrorunner

Αριθμός μηνυμάτων : 9
Ημερομηνία εγγραφής : 2014-08-29
Ηλικία : 33

Back to top Go down

Re: Competitor G Rigger (USA)

Post by Nitrorunner on Sun Aug 31, 2014 5:08 pm





avatar
Nitrorunner

Αριθμός μηνυμάτων : 9
Ημερομηνία εγγραφής : 2014-08-29
Ηλικία : 33

Back to top Go down

Re: Competitor G Rigger (USA)

Post by MrRcFanatik on Mon Dec 01, 2014 8:12 am

18000 RPM??  My brain is finding that hard to comprehend!  That thing goes like stink!  Awesome stuff!

_________________
Built. Not bought.
avatar
MrRcFanatik

Αριθμός μηνυμάτων : 88
Ημερομηνία εγγραφής : 2013-05-21
Τόπος : Canada

Back to top Go down

Re: Competitor G Rigger (USA)

Post by Nitrorunner on Mon Dec 01, 2014 9:12 am

MrRcFanatik wrote:18000 RPM??  My brain is finding that hard to comprehend!  That thing goes like stink!  Awesome stuff!
This is with a 6820/3 from PWW.  Still working on setup as you'll see at the end of both videos.  73.8mph on the gps best so far.



Last edited by Nitrorunner on Mon Dec 01, 2014 9:41 am; edited 2 times in total
avatar
Nitrorunner

Αριθμός μηνυμάτων : 9
Ημερομηνία εγγραφής : 2014-08-29
Ηλικία : 33

Back to top Go down

Re: Competitor G Rigger (USA)

Post by MrRcFanatik on Mon Dec 01, 2014 9:31 am

Nitrorunner wrote:
MrRcFanatik wrote:18000 RPM??  My brain is finding that hard to comprehend!  That thing goes like stink!  Awesome stuff!
This is with a 6820/3 from PWW.  Still working on setup as you'll see at the end of both videos.  73.8mph on the gps best so far.


https://youtu.be/_dLgxx2hxno

Very impressive!

_________________
Built. Not bought.
avatar
MrRcFanatik

Αριθμός μηνυμάτων : 88
Ημερομηνία εγγραφής : 2013-05-21
Τόπος : Canada

Back to top Go down

Re: Competitor G Rigger (USA)

Post by Nitrorunner on Mon Dec 01, 2014 9:38 am

3018/2 prop. 

avatar
Nitrorunner

Αριθμός μηνυμάτων : 9
Ημερομηνία εγγραφής : 2014-08-29
Ηλικία : 33

Back to top Go down

Re: Competitor G Rigger (USA)

Post by milemaster on Thu Dec 11, 2014 12:54 am

ohhh my god really fast!!!!
avatar
milemaster
Admin

Αριθμός μηνυμάτων : 348
Ημερομηνία εγγραφής : 2013-02-27

http://rcgreeksawboats.forumgreek.com

Back to top Go down

Re: Competitor G Rigger (USA)

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum